Showing posts with label MAC LAYERS. Show all posts
Showing posts with label MAC LAYERS. Show all posts

Wednesday, May 9, 2012

FORWARD ERROR CORRECTION AND RATE ADAPTATIONS | ADAPTATIONS AT THE MAC LAYER



FEC allows the WiMAX MAC layer to detect errors introduced during the transmissions of frames over the air link. There are three methods of FEC specified in the WiMAX system; Reed-Solomon concatenated with convolutional code (RS-CC), block turbo code (BTC), and convolutional turbo code (CTC). RS-CC is mandatory, while BTC and CTC are made optional due to their complexity, eventhough they provide 2–3 dB better coding gain than RS-CC. For the 802.16e, a hybrid ARQ (H-ARQ) has been included as an optional feature. There are three types of H-ARQ, classified based on the manner in which they handle the retransmissions. 

Type I H-ARQ retransmits lost or unacknowledged blocks using chase combining in which the old erroneous block is stored at the receiver and compared with the retransmitted copy. This helps to increase the probability of successful decoding at the FEC block during the retransmission attempts. Type II/III H-ARQ uses incremental coding rate to ensure successful decoding at the FEC block during the retransmission attempts. Rate adaptation works hand-in-hand with the FEC block in the WiMAX system. When a user experiences good channel condition, it is desirable to exploit these peaks in the channel gain to increase throughput. 

This is achieved by having the SS increase the coding rate, e.g., from rate 1/2 code to rate 1/4 code, so that more information bits can be transmitted per channel use while still keeping to the target bit error rate (BER). When the channel degrades, the rate is reduced back to the next minimum to ensure that the target BER is met. This dynamic process is carried out on a frame-by-frame basis in the WiMAX system, using the flexibility provided by MAP signaling to adaptively adjust the UL/DL rates.

Sunday, May 6, 2012

ADAPTIVE MODULATIONS, POWER, AND CODING RATE CONTROL



In wired networks the channel impairments tend to be constant or at least very slowly varying. Wireless networks in contrast are well known for rapidly fluctuating channel conditions even when the transmitter and receiver are stationary. Broadly speaking, the lower the modulation and coding rate, and the higher the transmitted power, the more channel fading a system can tolerate and still maintain a link at a constant error level. It is desirable therefore to be able to dynamically change the transmitted power, modulation, and data rate to best match the channel conditions at the moment to continually support the highest capacity channel possible. WiMAX systems support adaptive modulation and coding on both the downlink (DL) and uplink (UL) and adaptive power control on the UL. Adaptive modulation allows the WiMAX MAC layer to adjust the signal modulation rate depending on the channel or radio link quality. When the channel quality is good, the MAC layer chooses the highest modulation rate, e.g., 64QAM, giving the system the highest throughput. When the channel quality degrades, the MAC layer reduces the modulation rate, e.g., 16QAM, reducing the throughput. In practice, adaptive modulation and coding rate control are used in conjunction with power control. In the PMP network deployments with multiple users in a cell serviced by a BS, when a link degradation arises for a user, the BS first increases the transmitted power of the user to provide extra link budget gain, until it reaches the maximum permitted. If the received signal quality does not improve, then the coding rate is reduced. Extra redundancy is added to provide more coding gain for better error correction performance. If the received signal quality still does not improve, then the modulation rate is reduced as a last resort (as this significantly affects the throughput than others). Similar (reverse) process is also followed when link quality appreciates. For WiMAX mesh networks using the amplify-and-forward relaying option, mesh relaying cannot exploit adaptive modulation technology because relaying nodes are not able to decode the contents of the received OFDM symbols to retrieve the modulated data and remodulate them at higher or lower rate, to increase or reduce the transmission rate (or throughput) of the mesh streams in response to link quality condition. However for mesh networks using the decode-and-forward relay option, adaptive modulation and coding rate control can benefit the mesh relaying operation as mesh nodes can decode the mesh data streams and adjust the coding and modulation rate, depending on the forwarding link quality. For example in Figure 1 a relay node R decodes a data stream originally transmitted from the source node S using 16QAM modulation, and remodulates the data stream using 64QAM as it has good channel quality to the destination node D that can support this modulation rate. This results in fast and efficient use of the mesh links. Power control is applicable in WiMAX networks (PMP and mesh) in two ways: One, when nodes are transmitting data, they are regulated to transmit only the minimum power required to achieve successful reception at the receiver. Two, when mobile nodes do not have data (mesh relay or access service data) to transmit or receive, they go on sleep modes to save battery life.

 
Figure 1: Adaptive modulation at WiMAX mesh nodes.

Friday, March 23, 2012

WiMAX PHYSICAL AND MAC LAYERS



WiMAX PHY is responsible for the transmission of data over the air interface (physical medium). The PHY receives MAC layer data packets through its interface with the lowest MAC sublayer, and transmits them according to the MAC layer QoS scheduling. WiMAX MAC layer comprises of three sublayers, which interact through service access points (SAP) to provide the MAC layer services, as shown in Figure 1. The convergence sublayer (CS) interfaces the WiMAX network with other networks by mapping external network data (from ATM, Ethernet, IP, etc.) to the WiMAX system. MAC common part sublayer (MAC CPS) provides majority of the MAC layer services. The MAC CPS receives data from the CS as MAC service data unit (MAC SDU) and efficiently packs them on to the payload of the MAC packet data unit (MAC PDU) through the process of fragmentation and aggregations. Fragmented parts of MAC SDU are used to fill (aggregate) remnant portions of MAC PDU payloads that cannot accommodate full MAC SDU during package. As WiMAX provides connection-oriented service, MAC CPS is also responsible for bandwidth request/reservation for a requested connection, connection establishment, and maintenance. In the WiMAX standard, bandwidth request/reservation is an adaptive process that takes place on a frame-by-frame basis. This allows more efficient resource utilization and optimized performance. Thus the MAC CPS is required to provide up-to-date data on bandwidth request/reservation for each connection, on a frame-by-frame basis. The MAC CPS also provides connection ID for each established connection and marks all MAC PDUs traversing the MAC interface to the PHY with the respective connection ID. This sublayer also performs QoS scheduling by deciding the orders of packet transmissions on the PHY, based on the service flow decided during connection establishments. Privacy sublayer provides authentication to prevent theft of services, and encryption to provide security of services.

 
Figure 1: WiMAX Protocol stack.
The ensemble of the activities of the three sublayers of the WiMAX MAC layer constitutes the MAC layer services. MAC layer services can broadly be categorized into two: periodic and aperiodic activities. Periodic activities are fast- or delay-sensitive types of activities and are carried out to support ongoing communications, thus they must be completed in one frame duration. Examples include QoS scheduling, packing, and fragmentation. Aperiodic activities are slow- or delay-insensitive types of activities. They are executed when and as required by the system, and are not bounded by frame durations. Examples include ranging and authentications for network entry.
Related Posts with Thumbnails