Showing posts with label Service Flows. Show all posts
Showing posts with label Service Flows. Show all posts

Friday, December 18, 2009

Service Flow - WiMAX

Service Flow

Minimizing customer intervention and truck roll is very important for WiMAX deployments. The Provisioned Service Flow Table, Service Class Table, and Classifier Rule Table are configured to support self-installation and auto-configuration. When customers subscribe to the service, they tell the service provider the service flow information including the number of UL/DL connections with the data rates and QoS parameters, along with the types of applications (for example, Internet, voice, or video) the customer intends to run. The service provider preprovisions the services by entering the service flow information into the service flow database. When the SS enters the BS by completing the network entry and authentication procedure, the BS downloads the service flow information from the service flow database. Figure 1 provides an example of how the service flow information is populated. It indicate that two SSs, identified by MAC address 0x123ab54 and 0x45fead1, have been preprovisioned. Each SS has two service flows, identified by sfIndex, with the associated QoS parameters that are identified by qosIndex 1 and 2, respectively. qosIndex points to a QoS entry in the wmanIfBsServiceClassTable that contains three levels of QoS: Gold, Silver, and Bronze. sfIndex points to the entry in the wmanBsClassifierRuleTable and indicates which rules shall be used to classify packets on the given service flow.

(Source: Intel)

Figure 1: Service flow provisioning

When the SS with MAC address 0x123ab54 registers into the BS, the BS creates an entry in the wmanIfBaseRegisteredTable. Based on the MAC address, the BS will be able to find the service flow information that has been preprovisioned. The BS will use a dynamic service activate (DSA) message to create service flows for sfIndex 100001 and 100002, with the preprovisioned service flow information. This can be seen in Figure 1. It creates two entries in wmanIfCmnCpsServiceFlowTable. The service flows will then be available for the customer to send data traffic

Sunday, November 29, 2009

Service Flows and Classes

WiMAX services are the providing of information transfer to or between users. Information transfer services can have a variety of characteristics that can be selected and varied by the operator. The WiMAX system uses services flows to identify specific transmission characteristics for specific user services and a single user may have multiple service flows. Common sets of service characteristics may be defined by service classes.

Service Flows

Service flows are communication channels (e.g. a stream of packets) that have particular service characteristics associated with the transfer of data. For example, a communication link might have several service flows associated with it; a real time service flow for voice communication, a high-integrity service flow (low error rate) for data file transfer and a best effort service flow for Internet web browsing.

Each service provided on a WiMAX system is associated with a service flow. Service flows are requested, established and ended. When subscriber stations request services, the system can evaluate and negotiate the requested characteristics at any time.

A single WiMAX subscriber station may have multiple service flows for each connection (service flows can be different in different directions). Service flows can be dynamically added, changed and ended.

Service flows are uniquely identified by a service flow identifier (SFID). A SFID is associated with a specific connection identifier to determine the service characteristics a specific user will receive on that particular device

Related Posts with Thumbnails