Friday, April 2, 2010

Support of Beamforming in the IEEE 801.16 Standards


Add a Note HereBeamforming is defined in IEEE 802.16-2004 and in 802.16e. This feature is not in the set of the fixed WiMAX profiles. For the mobile WiMAX profiles, this feature is mandatory to be supported by the MS and optional for the BS. For the mobile WiMAX, several mechanisms that enhance the performance and operation of beamforming are provisioned.
Add a Note HereIn the downlink, in order to be able to beamform several users at the same and on different subchannels, a zone is dedicated (indicated in the DL-MAP). This region, labelled (2) in Figure 1, contains permutations with dedicated pilot channels. This means that an MS receiving a burst in this region only takes as valid pilots the pilots associated with the subchannel it has been allocated.

Add a Note HereFigure 1: Example of a frame with regions supporting AAS operation
Add a Note HereIn the uplink, as mentioned previously, the beamforming mechanisms can be applied on any MS. However, to improve the performance and to help the BS in detecting/measuring the interference experienced by the users it wants to serve, a specific signalling zone may be allocated: the uplink sounding zone (indicated by UIUC=13). Actually, the BS may ask some MS to transmit a signal in this zone so that the BS can evaluate the interference on some subcarriers for those MSs.

Add a Note HereFinally, in order to limit the signalling overhead, the WiMAX solution employing beamforming may use the compressed maps and submaps to transmit the common signalling messages (DL-MAP/UL-MAP). Indeed, this permits different modulation, coding and repetition schemes to be applied to several zones in the DL-MAP/UL-MAP message. This solution can also be employed in the case of MIMO or the support of the HARQ.

Tuesday, March 30, 2010

Benefits of Beamforming | Advanced Antenna Technologies in WiMAX

System Design Aspects on BS and MS
Add a Note HereAll the complexity and intelligence of a beamforming system is inside the base station. In addition to the spatial signal processing unit, the BS includes as many transceivers as the number of antenna elements. Usually, wireless systems implementing beamforming are operating between two to eight antenna elements and transceivers.
Add a Note HereOn the MS side, the impact for the support of beamforming is minor. Basically, beamforming can be applied to any MS. However, in order to provide better performance, the standards (and in particular IEEE 802.16e) define additional messages/procedures between the BS and the MS. Nevertheless, there is no hardware impact on the terminal side; only some additional software is needed for an optimised beamforming operation.
Add a Note HereThe beamforming algorithms aim to combine coherently the signal transmitted/received from different antenna elements. In order to achieve this correlation, the antenna elements need to be closely separated. For an optimum performance of beamforming, a spacing of half the wavelength λ is preferred. Consequently, assuming a four-element antenna array at 2.5 GHz would result in an antenna of about 22 to 25 cm width. The array itself is thus of a relatively small size, which is very beneficial for visual impacts on the environment.
Add a Note HereBesides, in order to maintain the signal coherence, mechanisms for calibrating the different transmit/receive paths are required, the algorithm for doing this being vendor-specific.
Benefits of Beamforming
Add a Note HereThe benefits of beamforming are manyfold: range increase and power saving at the MS side, interference mitigation and capacity increase.
Add a Note HereFirst, beamforming improves the link budget for the data transmission for both the downlink and the uplink. Indeed, by concentrating the energy in one direction, the resulting antenna gain in one direction is significantly increased (see Figure 1). This additional gain is beneficial for improving the coverage of the BS (less sites needed for a deployment) and/or for reducing the power needed by the MS to transmit signals (power saving).

Add a Note HereFigure 1: Range extension with beamforming
Add a Note HereTheoretical gains, compared with a conventional antenna, for an N-element antenna arrays are of 10×log(N) for the uplink and 20×log(N) for the downlink. For example, with a four-element antenna arrays the gains are respectively of 6 dB (12 dB) for the uplink (respectively the downlink). The gain in the downlink is higher since, on top of the beamforming gain, the power from each transmitter coherently increases. The value of those gains has been validated in many experiments on the field and proves to be in line with the theory. Additional gains are measured in the uplink due to the additional spatial diversity gain.
Add a Note HereSecond, because the energy is focused in the direction of the user, there is a general interference reduction in a cellular system employing beamforming. Indeed, when beamforming is deployed on the BS of a given geographical area, the beams are oriented as a function of the repartition of the users served in a cell; at one moment, on a given radio resource, a single user is served. As a consequence, the interference created by the communication of this user is only in a restricted angle compared to sectorised antenna deployment (see Figure 2).

Add a Note Here
Figure 2: Interference reduction with beamforming
Add a Note HereThe angle spread of the main lobe is approximately the total angle of the sector divided by the number of antenna elements N. For example, with a four-element antenna array and a 90° antenna, the resulting main lobe width (at −3 dB) is around 220°. Therefore, since the users are randomly spread, the beam directions change according to the user locations, which create additional interference diversity gain. The interference reduction is further improved with the use of explicit interference cancellation algorithms.

Add a Note HereTwo direct consequences of the interference reduction are: a better signal quality and availability across the cell area and a better capacity in the cell for systems using link adaptation. Indeed, since the CINR values are better, the possibility of using a better modulation and coding scheme is higher.

Saturday, March 27, 2010

Beamforming or AAS Technogies | Advanced Antenna Technologies in WiMAX

Beamforming or AAS Technogies
Add a Note HereBeamforming technologies may be encountered behind several wordings: smart antenna, beamforming and Adaptive Antenna System (AAS). In the following beamforming will be used.
Beamforming Basics
Add a Note HereThe main objective of beamforming technology is to take benefit from the space/time nature of the propagation channel. Indeed, due to multiple reflections, diffraction and scattering on the transmitter to receiver path in a cellular environment, the energy reaching the BS comes from multiple directions, each direction being affected by a different attenuation and phase.
Add a Note HereIn a macrocellular environment (i.e. the antenna of the BS is above the rooftop) the signals reaching the BS are inside a cone. The angular spread of the signal depends on the environment. In a urban environment, the angular spread is of the order of 20 degrees. In a more open environment, like in a rural environment, the angular spread is a few degrees.
Add a Note HereIn the uplink, the beamforming technology principle is to coherently combine the signals received for N antenna elements of an antenna array. A generic beamforming diagram is shown in Figure 1. A block diagram of a beamforming receiver (respectively transmitter) with an N-element antenna array is shown in Figure 1 (respectively Figure 2). In the case of a block diagram of a beamforming receiver with an N-element antenna array, a signal processing unit analyses the same signal received from the N antenna elements and computes weights (wi) that are applied on each path for combining.


Figure 1: Example of a block diagram of a beamforming receiver with an N-element antenna array



Figure 2: Example of a block diagram of a beamforming transmitter with an N-element antenna array
Add a Note HereOn the downlink, the processing is very similar to the uplink. Based on the information measured on the signal received in the uplink, it is possible to estimate the Direction of Arrival (DoA) from the uplink signal and to apply different weights, zi (amplitude and phase), to the different transmit paths of the same signal, so that the resulting antenna pattern focuses towards the direction of the user.
Add a Note HereSince the weights in the downlink depend on the uplink signals, this assumes certain channel reciprocity between the uplink and downlink signals since the BS do not know the downlink spatial channel response. Actually, the reciprocity can more realistically be assumed in the case of the TDD system since the uplink and downlink signals use the same frequency at different time intervals. On the FDD system, the reciprocity is more difficult to assess.
Add a Note HereIn fact, beamforming technology encompasses several techniques. First implementations of beamforming were based on simple antenna switching mechanisms: in that approach, the elements of the antenna array where simply switched on or off according to the received signals. This has the advantage of simplicity but the possibility for beamforming is limited. Today, beamforming uses an adaptive array: the amplitude and phase of each antenna element can be set independently. This has the advantage of having the possibility to achieve infinity of beams.
Add a Note HereWith adaptive beamforming, several optimising strategies may be used. The signal processing unit must maximise the received CINR. This can be achieved by having a resulting antenna pattern such that the antenna array creates a null in the direction of arrival of a strong interferer. However, the number of interferers that can be cancelled are limited by the number of elements constituting the array: with N antenna elements, it possible to have at most null N−1 interferers. In addition, this technique requires a good knowledge of the radio environment (which may imply additional overheads). This explains why in many implemented systems this method is mainly used in the uplink, where the BS can have maximum knowledge of the radio environment.
Add a Note HereFinally, an advanced implementation of beamforming can enable SDMA (Spatial Division Multiple Access). Provided that two or more users are sufficiently separated in space, it is possible to send them at the same time, on the same physical resources, different information on different beams. Nevertheless, the use of SDMA is quite difficult in a mobile environment where MSs that may be well separated at a given moment may be in the same direction at the next moment. 
Related Posts with Thumbnails